Energy Saving Defogger System
Water flow switch
Controller
mirror defogger
 
BAGEN Electricity Energy Saving Defogger System Introduction
 

BAGEN Electricity Energy Saving Defogger System makes fogless mirror auto-control. When the hot water supply switch is switched on, the hot water flowing through water switch which is installed on hot water pipe generates the signal to transmit working instruction to fogless mirror automatically. When the hot water switch is off, the hot water in water switch stops flowing, the controller will delay to tranmit the signal to fogless mirror to stop working automatically. 


 
Water switch
 

Model Number Size

Material

Installdtion

Technical parameters

Notice

DN20


DN25


DN32

Copper

Level &
Vertical

Size: 86×43×32 mm, 3/4 FNPT（China）
1 Max Switch Voltage DC: 200VDC
2 Max Switch Current1A
3 Start Flux: 1.5L/min
4 interface: water
5 Pressure: ≥3.0Mpa
6 working Life: 1000000 (10VDC/10mA)
7 Operating Temperature: 0-125℃
8 cable: UL ,VDE ,CCC Standard

1 Working environment Temperature should be above 0℃
2 It's not acceptable to disassemble or damage product components
3 Keep away from magnetic objects
4 This electromagnetic valve is induced by water, alternative isn't permitted
 
Controller
 
Controller
WARNING

INPUT 90-240V AC 50/60HZ
MAXIMUM CURRENT 10A
MAX.OUTPUT VOLATGE 90-240V AC 50/60HZ
MAX.OUTPUT CURRENT 10A
SWITCH VOLTAGE 12V DC
MAX.SWITCH CURRENT 250 mA

INSTALL IN ACCORDANCE WITH THE NATIONAL ELECTRICAL CODE. DISCONNECT POWER BEFORE SERVICING.

bathroom backlit mirror
 
Company:Shanghai Bagen Electronic Science& Technology CO.,LTD
Tel： +86-21-5090 9038 ,5090 9037
沪ICP备05052894号
Direct Line: +86-21-5090 7817 Email:bagen@yashdefogger.com ??????!