1 Install defogger to mirror

The installation of defogger is simple, A towel, platen or other similar object can finish the stick step. The back protected layer with self-adhesive glue, this way of glue is simply and stable.

2 Fix fog free mirror onto the wall

2.1 Junction box location: please fix the power supply and junction box in the place shown on the drawing.

2.2 Mirror support panel: In order to utilize heat energy more effectively, usually apply a 9-18mm thickness plywood panel to support the mirror from wall, In installation situation, the cable lead of defogger may have some surplus length after finished the cable connection. Then we suggest opening a hole on the plywood panel as shown the drawing to hold the cable so that mirror is stable and flat after installation.

2.3 Cable connection: there is no live pole & neutral pole difference on defogger’s cable, connect the cable with power supply by connector.

2.4 fix the mirror on wall: apply some neutral silica glue to the plywood panel, and place mirror to the designated position.

3 cautions

1 The place that the mirror will be installed should be firm, flat, dry without sharp objects.

2 The power cables should go through wire sink.

3 Please allow a 1mm gap between the mirror and hard substances, eg ceramic brick, marble, tiles as well as metal and wood periphery around mirrors, because the mirror may expand during heating.

4 Wire to power supply

4.1 When apply the energy saving fog free mirror system, the connection of the whole electric circuit should be conformed to your local electric principles according to the above instructions. Otherwise the system doesn’t work.

4.2 When apply the fog free mirror only without energy auto saving system, the fog free mirror can share the same switch with the mirror light, or set a separate switch.